Products

  • All valves can be made from galvanize, carbon steel or stainless steel
  • Double Blade Valves
  • Blast Gate Valves
  • Tee Distributor Valve
  • Single Blade Valves
  • Air Bypass Valves
  • HI VAC Valves

Get a quote:

Need pricing on a future or upcoming project?
Just email us at [email protected] and we will begin the process with you.

 

Custom Valves from Herman Reeves:

Double Blade Valves:

This valve diverts fiber to feed two different sources and is constructed with two blades with felt seals on the inside of the valve. This valve is equipped with one air cylinder, two confirmation switches, and one solenoid. This valve can be used under positive or negative pressure.
- Constructed of heavy 14ga thick galvanized or stainless steel, with bolted construction. Supplied with flange bearings, and bolted lexan window for easy access.
- 45 degree angle only
- Operated by compressed air cylinders, controlled by electrically connected solenoid. 120v control circuit and 75 psi minimum air pressure. Optional 24v DC or AC control circuits available.

Blast Gate Valves:

Automatic energy saving blast gates operated by double-acting compressed air cylinders. Cylinders are controlled by electrically-connected solenoid or remote switch. Available in sizes 4" diameter to 36" diameter. Options 24V DC or AC control circuits available. 120 control circuit and 75psi minimum air pressure.

 


Tee Distributor Valves:

This valve offers the flexibility to feed two sources of Fiber flow at the same time or one source at a time. This valve is equipped with two air cylinders and controls.

 

 


Single Blade Valves:

This valve receives fiber and is constructed with one blade with felt seals on the inside of the valve. This valve is equipped with one air cylinder, two confirmation switches, and one soleniod. This valve can be used positive or negative pressure. - Constructed of heavy 14ga thick galvanized or stainless steel, with bolted construction. Supplied with flange bearings, and bolted lexan window for easy access. - 45 degree angle only - Operated by compressed air cylinders, controlled by electrically connected solenoid. 120v control circuit and 75 psi minimum air pressure. Optional 24v DC or AC control circuits available.

Air Bypass Valves -
This valve allows fresh air to enter into the side of the valve. This valve is equipped with one air cylinder, two confirmation switches, and one soleniod. This valve can be used under positive or negative pressure.

New and reconditioned valves are always available.

HI VAC Valves -
Good selection of reconditioned HI VAC Valves at all times.